A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade 4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres/12 inches inclusive, with occasional waves up to 0.5 metres/20 inches of height caused e.g. by vessels passing by.

• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.

Table of Specifications:

• Length (cm) [ft.-in.] 375 [12-4]
• Width (cm) [ft.-in.] 96 [3-6]
• Number of air chambers 3 + 1
• Dimensions – packed in carry bag (cm) [in.] 70 × 46 × 30 [28 × 18 × 12]
• Dimensions – packed in cardboard (cm) [in.] 70 × 47.5 × 32 [28 × 19 × 13]
• Maximum operational pressure 0.02 MPa [0.2 Bar/3 PSI]
• Weight (kg) [lbs.] 21 [46]
• Load (kg) [lbs.] 200 [441]
• Maximum number of people 1
• Draught (cm) [in.] 15 [6]
• The highest anchor above surface (cm) [in.] 55 [28]

Technical Description:

1. Side tube
2. Bottom
3. PUSH/PUSH valve - enables infl ation/defl ation, pressure control, and pressure measurement by a pressure gauge
4. Relief valve
5. Manufacturer’s label
6. Yellow “WARNING” label
7. Seat board
8. Inflatable seat with fi shing rod mounts
9. Floor board
10. Bracket board
11. Mount for fixing the seat and the bracket board
12. Board
13. Handle
14. Plastic handle
15. Safety rope
16. Safety rope tie-down
17. Baggage fi xture
18. Bungee netting
19. Flexible rope with snap hooks
20. Rope loop for anchor fastening
21. Anchor rope
22. Anchor rope fi xture with a D-ring
23. Rest fi xture (on the cylinder)
24. Drainage hole
25. Flexible rope for paddle fi xing
26. Flexible rope fi xture
27. Skeg-fi n and probe metal bracket fixture
28. Skeg-fin
29. Probe bracket
30. Fishing rod plastic holder
31. Screw with a plastic nut (see detail C)
32. Screw valve for small chambers (seats, leg rests, etc.)
33. Backrest straps
34. Seat board fixtures